Indoor Fixed LED Display
Home / Indoor Fixed LED Display /

EFP Series

EFP Series
EFP Series
EFP Series
EFP Series
EFP Series
EFP Series
EFP Series
EFP Series

EFP Series

Related Products
EDI Series Fine Pixel Pitch LED Indoor Fixed Screen

Pixel Pitch: P1.25mm / P1.53mm / P1.86mm / P2mm / P2.5mm / P3mm / P4mm / P5mm Module Size: 320mm×160mm Cabinet Size: 640mm×480mm / 640mm×640mm / Or customized size Pixel Configuration: SMD Refresh Rate: 1920Hz / 3840Hz Product Material: Die-casting Aluminum Power consumption (Avg./Max.): 300W / 800W IP Rate: IP30

Learn More
D Series Super Slim Fine Pixel Pitch Indoor Fixed LED Screen

Pixel Pitch: P1.95mm / P2.5mm / P2.976mm / P3.91mm Module Size: 250mm×250mm Cabinet Size: 500mm×250mm×33mm / 750mm×250mm×33mm / 1000mm×250mm×33mm Pixel Configuration: SMD Refresh Rate: 3840Hz Product Material: Die-casting Aluminum Power Consumption (Avg./Max.): 200W / 800W IP Rate: Indoor IP20

Learn More
H Series P2.604 P2.976 P3.91 P4.81 LED Wall mounted Screen 500×500

Pixel Pitch: P2.604mm / P2.976 / P3.91mm / P4.81mm Module Size: 250mm×250mm Cabinet Size (W×H×T): 500mm×500mm×80mm Pixel Configuration: SMD Refresh Rate: 1920Hz / 3840Hz Product Material: Die-casting Aluminum Viewing Angle: 140/140 degrees Power Consumption (Avg./Max.): 240W / 710W IP Rate: Indoor IP40 Panel Weight: 4.2KG

Learn More
LED Magnet Module for cost-effective indoors LED Screen

Pixel Pitch: P1.25mm / P1.53mm / P1.86mm / P2mm / P2.5mm / P3mm / P4mm / P5mm Module Size: 320mm×160mm Cabinet Size (W×H×T): 960mm×960mm×120mm Pixel Configuration: SMD Refresh Rate: 1920Hz / 3840Hz Viewing Angle: 140/140 degree Power Consumption (Avg./Max.): 300W / 800W

Learn More
DM Series

Scope of Application This product specification is only applicable to full color SMD LED DM Series P1.25 , P1.53 , P1.86 , P2.5   Ultra-thin and Strong ◆ Only 11.8mm thick ◆ No need for a box, not easy to deform ◆ Aluminum material green environmental protection   High Reliability ◆ Fast Signal Transmission     ◆ Good Heat Dissipation     ◆ Ultra-high Applicability   Physical Properties ◆ Resistant to high temperature and extreme cold ◆ No limit on the number of cabinets ◆ Not afraid of squeezing the height and leveling   Product Picture Perspective View ◆ Easy To Install     ◆ No Need Cabinet     ◆ Replacement Fast Front View ◆ Inky Consistent     ◆ High Smoothness     ◆ High Angle Back View ◆ High Heat Dissipation     ◆ High-strength magnets     ◆ Fire-proof material   Reflesh &. Gray-scale ◆ High Reflesh Rate:≥3840Hz ◆ High Gray-scale:≤16bit ◆ High color reduction degree, real &. exquisite,the brightness is stable and uniform, no flicker, no sense of particles   High Contrast Using 1010, 1212, 1515 lamp etc. inside is composed of RGB chips, exterior is enclosed by a matte black stand, The ink color is uniform and consistent, Contrast ratio is up to 5000:1   Drive Solutions ◆ With hidden function, high scan ◆ Improved and eliminated first line dimming ◆ Improve the function of low gray color and pitting   High Viewing Angle Vertical and Horizontal Perspectives: ≥160°   Installation Wall Mounted Installation Floor mounted Installation   Product Packaging Outer Packing Diagram Packing Instructions : The packing material adopts high-quality K carton, containing pearl cotton and Angle guard, which can effectively avoid damage caused by collision during transportation.     Directions for use Proper use of LED display Dehumidification within normal range If the ambient humidity is in the range of 10%-65% RH, you are advised to turn on the screen once a day and use it for more than four hours to remove moisture from the screen. Dehumidification within exceeded range When the ambient humidity is above 65%RH, dehumidifier the environment. It is recommended to use the display for more than eight hours a day and close the doors and Windows to prevent the display from dampness. Preheat dehumidification method When the display is not in use for a long time, the display must be preheated and dehumidified before use to avoid moisture caused by lamp tube defects. Specific methods: 20% brightness for 2 hours, 40% brightness for 2 hours, 60% brightness for 2 hours, 80% brightness for 2 hours, 100% brightness for 2 hours,With this brightness increasing dehumidification.     Acceptance Requirements LED display acceptance requirements and methods Display Brightness Set the display screen to bright white and measure the brightness of the display screen with a light gun within 10 minutes. When measuring brightness, the light gun should be placed at the middle point of the best viewing distance, and the light gun should be perpendicular to the screen body. At the same time, ensure that the black position of the observation window covers more than 16 pixels. Adjust the focal length so that the LED lamp beads can be clearly seen in the eyepiece, and then measure and read the brightness data. Viewing Angle When measuring the visual Angle, the screen size should be combined with the best viewing distance of the screen, and the screen should be moved to 160° on the left and right sides respectively and 80° on the upper and lower sides of the screen for observation. It is required that the screen has no obvious dark spots and dark blocks. Dark Spots Bright Spots Determine the best viewing distance according to the screen size, stand in the middle of the best viewing distance, visually detect no dark spot and regular bright spot.     Product Application LED Display products are widely used in smart city, command and dispatch, conference medical education, security monitoring and emergency response, radio and television broadcasting, military operation command center, airspace and rail transit, e-sports, oil and gas energy and other fields.

Learn More
ESL Series

Small Pixel Pitch ◆ Ultra Thin     ◆ Ultra Light     ◆ Excellent Stability   Light Weight Debut With a Light Pack, Weight < 7kgs Only Lightweight Design. Lighter and Thinner   Product Details   The Installation Diagram Cabinet Installing By Fast Lock System Connect The Power and Data Cables Between Cabinet and Cabinet Install The HUB Board and Fix The Magnet Module Mounting By Magnet     The CNC High Accuracy Process Cabinet Flatnes of Cabinet ≤0.01mm   Case Show ◆ Ultra Thin     ◆ Intelligent Module     ◆ Front Service     ◆ Easy Maintenance     ◆ High Definition   High Refresh Rate   170° Viewing Angle Vertical and Horizontal Perspectives: ≥170°   16:9 (2K/4K/8K/16K) ◆ 16 bit gray scale     ◆ 8000:1 contrast ratio     ◆ 68.7 billion colors   Dual Power and Signal Backup System   Panel Dimension   Application

Learn More
Customized Size P3.3 P4 P5 LED Lamp Pole Screen

Pixel Pitch: P3.3mm / P4mm / P5mm Module : 160mm×160mm IP Rate: IP65 Brightness: 5500-6000cd/sqm Refresh Rate: 1920Hz / 3840Hz Power Sumption(Max./Avg.): 880W / 270W

Learn More
ESL Series

Small Pixel Pitch ◆ Ultra Thin     ◆ Ultra Light     ◆ Excellent Stability   Light Weight Debut With a Light Pack, Weight < 7kgs Only Lightweight Design. Lighter and Thinner   Product Details   The Installation Diagram Cabinet Installing By Fast Lock System Connect The Power and Data Cables Between Cabinet and Cabinet Install The HUB Board and Fix The Magnet Module Mounting By Magnet     The CNC High Accuracy Process Cabinet Flatnes of Cabinet ≤0.01mm   Case Show ◆ Ultra Thin     ◆ Intelligent Module     ◆ Front Service     ◆ Easy Maintenance     ◆ High Definition   High Refresh Rate   170° Viewing Angle Vertical and Horizontal Perspectives: ≥170°   16:9 (2K/4K/8K/16K) ◆ 16 bit gray scale     ◆ 8000:1 contrast ratio     ◆ 68.7 billion colors   Dual Power and Signal Backup System   Panel Dimension   Application

Learn More
Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Subject : EFP Series